west bay valver

Anything about BXs
Post Reply
User avatar
greendale65
BXpert
Posts: 509
Joined: Sun Mar 02, 2014 5:52 pm
x 20

west bay valver

Post by greendale65 »

Hi all ,
Ihave had some pipes replaced all ok
next job cam belt
can i say this my car sat on my drive from october 2022
until now right the question is dont ask me why but before
the car went away electric windows stopped working dont know why
any ideas where to look.
:? :?
User avatar
Jaba
1K Away
Posts: 1898
Joined: Tue Jul 05, 2005 7:54 am
Location: Usually in the garage
My Cars: BX GTi, C3 Auto
x 83

Re: west bay valver

Post by Jaba »

First a few questions to try to eliminate some possibilities before you have to get the multimeter out.

Is it all the four windows.
Does everything else electrical work, if not what is non functional too.
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.
User avatar
greendale65
BXpert
Posts: 509
Joined: Sun Mar 02, 2014 5:52 pm
x 20

Re: west bay valver

Post by greendale65 »

Hi all,
Sorry should have said it's all
four windows.
:? :?
User avatar
David
BXpert
Posts: 523
Joined: Sun Oct 27, 2013 10:54 pm
Location: Manchester
x 47

Re: west bay valver

Post by David »

Has the fuse blown for the 2nd ignition live? (There are 3 in total, 1 & 2 come on together on the 1st notch of the key, 3 comes on with the 2nd notch).

Do the brake lights, sunroof, dash illumination & map reading lights work? If not, then that'll be your issue. Otherwise all 4 windows wouldn't fail together as they're fed from different fuses and different relays, the only common link is the relay feed; which is L2 on the ignition.

Hope that helps.
1992 Citroën BX 1.9 Diesel Meteor 4x4 - The Project.

1992 Citroën BX 1.9 TXD (with GTI engine; Mulleys old car) - Parts car.

2004 Citroën Xsara Desire. (Now gone).

2016 Ford Focus Zetec - Daily Driver. (Absolute bone shaker).
User avatar
greendale65
BXpert
Posts: 509
Joined: Sun Mar 02, 2014 5:52 pm
x 20

Re: west bay valver

Post by greendale65 »

Hi Thanks David,
will look into that after i get the cam belt sorted
Thanks
Post Reply