Having carried out a transplant on a BX 19 Turbo Diesel this week I need to refill and get the hydraulics working. I've connected all the pipes again...
Last post
If the pump is a bit weak, you can induce it to pump by turning the steering.
All my 3 BXs have slightly strange problems at the moment. They are all livable with but in the long run do need fixing. So I am preparing my plan of...
Last post
Yes, the main feed pipe is 10mm diameter, the return is 8mm, I bought 2 metres of each and the job was easy, mine was probably more comfortable...
BXGTi went through MOT almost OK today APART from n/s CV Gaiter. I've not done one of these before but see the procedure in Haynes. Advice from those...
Last post
What Jeremy suggested is the easier method that makes use of BX suspension specialities. It saves one the hassle of releasing the balljoint.
I wish to thank fellow members for their help over the last few days.
But another question.
Are the BX's CV joints removed in the same manner as the...
Last post
Well actually,
Most of them do, BUT some of the later K & L reg ones have a different CV joint on the end which has a different number of splines....
Hello all...........After many bx less years I have finally given in and bought a 92 BX estate1900 TGD. I cant believe how they get under your...
Last post
If the short pipes to the rear brakes and suspension cylinders look OK, examine them thoroughly and if OK leave them alone.
The brake pipes are easy...
My TXD has developed a clunk front offside but only intermittently and with wheels pointing to nearside if I go over a slight bump or uneven road. It...
Last post
You can replace the bottom mount in situ - I've done it. I think instructions are on here somewhere
I am considering changing my BX's interior from GTi to 16v. Is anybody with experience of removing and replacing seats and doorcards able to give me...
Last post
Yup - drivers and passenger seats are not interchangeable. But it's still not impossible to find your way around a problem that can't be solved by...
Whilst I think the idea of having the sprayers mobile on the wiper arm is a great idea, the BX plastic perforated pipe isn't brilliant, and does have...
Last post
I rigged 3 of them up to an old water pump, driven from a hamster wheel via an old cambelt, to make a very effective in-oven poultry basting device....
Well I have started. So far, everthing is disconected ready for the hoist in the GT and I am half way through removing the aircon bits in the TRS....
Last post
Cheers Stuart. Thats a good point about the smell of gear oil. Ill have to investigate that, but like you say I might as well do the oil seals in the...
I have just been put in touch with a chap who is manufacturing Bio Diesel in the Wrexham area, have arranged a regular delivery, will run the dino...
Last post
Just becareful there is a chap in lincoln making and selling it legaly but it is crap i used it and it cost me a set of injectors it was really thick...
Hi Guys, Just had a look for the water leak and as far as I can see its one of the smaller hoses that goes to where the oil filter fits, its the hose...
Last post
try not to get the tools dirty these days unless I have to, severe problem with arthritis. used to be into Landrovers, completly rebuilt a series two...
currently struggling with diagnosis of unknown fuel system problem
I have a bx17 tzd non turbo h reg
when the fuel tank is completely full, the...
Last post
I've got similar probs with my 1.7 Turbo .....poor starting?,erratic tickover?....I've no idea whats causing it but I have found that by pressurising...
I am now starting to remove my engines from my two BX's. The good engine seems to smoke a little (white smoke). Thing is, when I first start it after...
Last post
Cheers for the ideas guys. Yeah it looks to be white smoke but I always find it very hard to see what colour smoke is. Hopefully its water as it has...
Firstly, my apologies for posting a Xantia question, but I can't be bothered going over to the other site, as I no lnoger know what my password is...
Last post
Curiously if you search on the other site you will find the tale of someone with a similar problem and it turned out that the catalyst was blocked by...
i have a very low mileage zx turbo diesel engine which i kept from my old zx, and have been wondering wether it will fit in my bx estate 1.7tzd, has...
Last post
I used all of the alternator bracketry from the BX motor though the ZX alternator will fit, you will need a slightly longer flat belt if you retain...
Last night I came home, pulled up, turned the lights off and switched the engine off. In between turning the lights off and switching the engine off,...
Last post
David asked Where's the smiley with the Zip across his mouth?
Hi can anyone give me any ideas the rear suspension is quite firm i have just changed the spheres so i am wondering if my rear H/C is stuffed i know...
Last post
oh poo that means i will have to try and get some new ones then either that or i try and scrounge a pair :wink:
There's what looks like a flap at the bottom of the front inside wheelarch - anyone any idea what its for apart from, in my case- trapping an awful...
Last post
You're right - I'm sure there was once a plastic plug, but the hole in which it once nested is now a rusty cavern. I was scraping out as much rust as...
I was chatting to someone the other day who asked why we need to change diesel engine oil every 5k miles. I realised that I don't know - I've always...
Last post
The oil I put in it was standard 15w40 which is as thick as I would imagine is necessary for a 120,000 mile car from 1986. I thought 20w50 would be...
What sort of time does it take to change the two front flexi hoses on a 19 petrol bx guys? Mine failed on both and where I work going to change them...
Last post
Just rang citroen for the Flexis as I get them at trade, they are no longer available they said a sthe car is SO old! but they have 2 in stock for a...
as the topic title, im getting a semi nasty scraping sound from the rear drive side wheel area when turning right and over speed bumps. The rear arms...
Last post
Hmmm, damn good thoughts there!
As i only propped the car up on the bottle jack thing supplied with the car i (strangely) did'nt stick my head under...
A russian company have come up with an engine additive that can significantly lower fuel consumption and increase longevity....
Last post
Why Well because I tend to ramble on a bit and can go off course onto something else. As my son has said more than once EH what are you on about. See...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
