Leaking rear brake union
Replies: 6
by
valerie »
Fri Oct 29, 2021 10:48 pm
First post
Hi,
I have just replaced the rear brake pipes with some I bought from another citroen enthusiast, about 10 years ago.
I have never had any problems...
Last post
Good result.
Those sleeved joints are extraordinarily good at handling exteremely high pressures, provided that everything lines up, and the pipe end...
6 Replies
1004 Views
Last post by white exec
Thu Nov 04, 2021 6:27 pm
Lucas injector pump
Replies: 4
by
pwykes »
Thu Nov 04, 2021 10:55 am
First post
G,day Chaps,
My bx.1.9d has been off the road for a while for extensive maintenance. I had problems getting it started and i have found that there...
Last post
I have temporary bypassed the original filter assembly to remove it out of the equation, the electric pump is now the primer. once primed the pump is...
4 Replies
797 Views
Last post by pwykes
Thu Nov 04, 2021 4:35 pm
BX 16 Engine light idle fluctuate
Replies: 20
by
Glenn_a »
Tue Sep 07, 2021 7:42 am
First post
Hi tech people, I am new here and not familiar with this Citroen BX 16 petrol and need your help...
I am having issues with the idle fluctuating, I...
Last post
I have a 1989 16v as well, it has the 3 row ECU and a lambda sensor, it's the DFW 147hp engine.
I've installed a new idle air valve, leads, coil,...
20 Replies
4158 Views
Last post by krekov
Tue Oct 12, 2021 5:35 pm
Wheel Bolt Torque BX 19 GTI
Replies: 2
by
BXTASY »
Tue Oct 12, 2021 12:36 am
First post
I've removed the wheels on my BX once, to have them powder-coated. Now they're back on, but dang if I can find the torque spec. anywhere. Not in...
Last post
Thanks! Found it in the old (brown cover) Haynes, but the newer version (blue cover) has different Chapter names - it's under Ch. 11, Suspension and...
2 Replies
731 Views
Last post by BXTASY
Tue Oct 12, 2021 4:24 pm
Exhaust smells bad and fluctuating idle
Replies: 4
by
Jugostran »
Tue Oct 12, 2021 8:13 am
First post
So hey, I am trying to diagnose this issue with my 1989 BX 16 TRS. Basically, the exhaust smells like an old Lada. Now, I don't know whether this is...
Last post
I’m afraid I don’t know the 1.6 engine at all, so I can’t tell you exactly where the pump is. It’s driven either by a pulley on the camshaft or...
4 Replies
961 Views
Last post by Jugostran
Tue Oct 12, 2021 10:55 am
BX19D cooling system - thoughts?
Replies: 6
by
white exec »
Sun Oct 10, 2021 12:09 pm
First post
BX diesel cooling system.jpg
BX diesel coolant level tube.jpg
.
The BX non-turbo diesel's cooling system is pretty cleverly designed, and...
Last post
OK. That's making sense.
If the linking hole is at the bottom, and then the system is filled - so no more air emerges from any of the bleed points,...
6 Replies
1050 Views
Last post by white exec
Sun Oct 10, 2021 6:49 pm
Twin blower removal and inspection (AC)
Replies: 5
by
white exec »
Sun Sep 19, 2021 12:17 pm
First post
As part of investigating erratic blower power on our 19D (with AC), where blower speed could periodically fall away (to less than half normal),...
Last post
Great video, Vanny.
Agree about the Haynes drawing, where the recirc/fresh air diverters do not look like the mk.2 items, although the blowers...
5 Replies
1088 Views
Last post by white exec
Fri Oct 01, 2021 5:58 pm
Central locking locks rear doors, and immediately unlocks
Replies: 10
by
Jugostran »
Wed Sep 22, 2021 5:45 pm
First post
Hey, so, I've been having this problem since I got my '89 16 TRS. When I lock the car from the driver's side, the rear doors lock, but immediately...
Last post
I lubricate the mechanicals of the latch and the associated rods. Not tried lubing the motor its self yet.
10 Replies
2168 Views
Last post by Vanny
Fri Oct 01, 2021 4:42 pm
Fitting AC to a 16V
Replies: 18
by
krekov »
Thu Sep 09, 2021 8:20 pm
First post
Hi,
I've come across a bargain BX Pallas, last production year. It has AC, supposedly working.
It has the 1.8 turbo diesel, and I'd like to swap the...
Last post
Not easy.
Gates do a T36761, which is 70.5mm diam, 26 wide, with 8mm mounting hole, and the square tensioner socket.
but also o.o.Stock.
Citroen's...
18 Replies
2475 Views
Last post by white exec
Sat Sep 25, 2021 11:45 am
Dashboard creaks
Replies: 4
by
white exec »
Thu Sep 16, 2021 11:42 am
First post
Creaking from the ship's rigging is not unknown with BX, as so much plastic is assembled next to plastic.
The steering shroud has been particularly...
Last post
I've found that B pillar covers are major offenders. I recommend sticking something between the middle pillar cover and lower sill finisher, the one...
4 Replies
778 Views
Last post by krekov
Thu Sep 16, 2021 9:40 pm
Turbo fuel limiter
by
jvbram »
Sat Sep 11, 2021 2:51 am
On top of the fuel injection pump there is a fuel limiter with a hose going to the intercooler. I am familiar with the air fuel valve on another...
0 Replies
61770 Views
Last post by jvbram
Sat Sep 11, 2021 2:51 am
BX 16 Valve Idle Problems
Replies: 17
by
frog »
Sun Mar 06, 2016 1:49 pm
First post
I've had an ongoing problem with my BX 16valve since I bought it 5years ago:
When the car gets hot (especially in summer, stopped in traffic, at a...
Last post
Thanks Matt I will investigate that lead (pun intended)..
New o2 sensor on the car has made no difference. Though the car has a different exhaust...
17 Replies
5057 Views
Last post by Glenn_a
Mon Sep 06, 2021 3:19 am
Tip: Hydraulic pump reluctant to pump after fluid change
Replies: 2
by
white exec »
Fri Aug 27, 2021 8:27 pm
First post
:idea:
Forgot to mention this...
Twice, over recent months, the hydraulic reservoir has been syringe-emptied to refill it - first with...
Last post
Originally (back in October) did the funnel into the suction hose, twice, and it was (surprisingly) not successful - the pump still wouldn't...
2 Replies
596 Views
Last post by white exec
Sat Aug 28, 2021 6:33 am
BX A Pillar Sunroof Drains
Replies: 3
by
krekov »
Thu Aug 26, 2021 12:40 pm
First post
Hi,
I've decided to tackle the issue of water in my footwells.
It turned out the black rubber tubing that goes outside of the cabin was detached from...
Last post
Ooh, that's interesting! I thought those pieces of rubber were things you plugged the drains into, since they go into holes under the dash which lead...
3 Replies
6081 Views
Last post by krekov
Sat Aug 28, 2021 2:58 am
1.9D N/A under hot conditions
Replies: 15
by
white exec »
Sun Aug 08, 2021 9:34 pm
First post
Done enough driving of our 1.9D non-turbo now to realise that engine power drops off noticeably when outside temperature exceeds 29/30°C, and...
Last post
Short bonnet, Tim, with two black ventilation slats.
15 Replies
1927 Views
Last post by white exec
Wed Aug 18, 2021 1:16 pm
Blower control (twin blower for A/C) - 19D
Replies: 6
by
white exec »
Tue Aug 03, 2021 8:07 pm
First post
Have today had some erratic behaviour of blower speed, and am needing to chase through the controls.
Blower fans both working, but running at much...
Last post
. . . Others have cured blower speed problems by connecting an extra earth to one of the control board connections. You will have to do a search for...
6 Replies
891 Views
Last post by white exec
Thu Aug 05, 2021 8:12 pm
Clutch thrust bearing carrier - 1.9D.
Replies: 11
by
paulwitchard »
Sun May 23, 2021 3:18 pm
First post
At the moment the engine and box is out of the 1.9D, failed the CT (french MOT) due to oil leaking everywhere.
The thrust bearing carrier is causing...
Last post
Splined, thanks Jaba - a bit of a warm with the blowlamp, and I started tapping with one of my smaller hammers and a drift, and after a bit of...
11 Replies
2640 Views
Last post by paulwitchard
Mon Jul 12, 2021 10:39 am
BX Auto Windows Switches
Replies: 1
by
krekov »
Sat Jul 03, 2021 7:18 pm
First post
Hi,
I have managed to purchase a control box for the automatic windows, but I only have the normal switches.
Do they work the same as those other...
Last post
The internals are wired differently, so you can't just plug 'normal' switches into them without moving some wires.
Ideally you'll need to get an...
1 Replies
531 Views
Last post by David
Sun Jul 04, 2021 3:25 pm
BX Air conditioning R134A conversion (all you need to know thread)
Replies: 26
by
Dragon Man »
Mon Nov 07, 2016 9:48 pm
First post
Hello, i decided to make a thread on the BX's aircon system specs:
disclaimer, air conditioning systems must only be serviced by licensed personnel....
Last post
Wonder whether the copper condenser was dropped on cost grounds, or just superseded by the ali one? Most more recent cars use ali.
Using R134a...
26 Replies
11346 Views
Last post by white exec
Wed Jun 30, 2021 7:11 am
'89 BX 16V overheating on standstill?
Replies: 11
by
krekov »
Fri Jun 25, 2021 7:30 pm
First post
Hi, my second topic here! It would appear that my BX is now running correctly, but it seems to overheat in traffic.
I say seems , because I don't...
Last post
Being a one fan model, I would suggest your dropper resistor has blown, so that the lower speed doesn't work. You can just replace it with a jumper...
11 Replies
1325 Views
Last post by Kaapelimies
Mon Jun 28, 2021 5:56 pm
0 Replies
2854 Views
Last post by white exec
Fri Jun 25, 2021 1:21 pm
BX 4X4 Reproduction - France.
by
David »
Wed Jun 23, 2021 12:48 pm
Hi all,
I've come across a website that states that they can make new replacement stronger 4x4 transfer shafts to replace the weak original units on...
0 Replies
2851 Views
Last post by David
Wed Jun 23, 2021 12:48 pm
Air-con TXV O-rings
Replies: 7
by
white exec »
Mon Jun 14, 2021 12:02 pm
First post
Does anyone know the sizing of the two sizes of O-ring for the TX valve?
.
DSCF3916.JPG
Have taken delivery of a
Mahle Behr AVE87000P, which...
Last post
Well done for getting it out, its always a struggle! As condensation does form on the outside of the TX valve due to its running temperature its...
7 Replies
870 Views
Last post by Jaba
Mon Jun 21, 2021 10:23 pm
'89 BX 16v Error Code 52 - Air leaks?
Replies: 19
by
krekov »
Wed Jun 16, 2021 6:36 pm
First post
Hi,
This is my first post, excuse me if I omit some pertinent information.
Anyway, I've recently bought a sorry little 1989 16v for total...
Last post
I believe that can only be done on non-catalyst models, is there any way to do it on others?
On the old, broken ECU I was able to adjust the mixture...
19 Replies
2280 Views
Last post by Kitch
Mon Jun 21, 2021 5:26 pm
1992 BX 19 tzi cracked engine block
Replies: 4
by
pdl1989 »
Wed Jun 09, 2021 2:14 am
First post
So I discovered recently my car was leaking coolant and the other day took it to the mechanic, who tells me the engine block is cracked. It still...
Last post
Sounds like the mechanics aren’t too keen on trying to weld the crack, but I’ve found a DZK engine from a BX enthusiast on Aussiefrogs. I’ll pick it...
4 Replies
765 Views
Last post by pdl1989
Fri Jun 11, 2021 5:01 am
Central locking
Replies: 5
by
Culasse »
Mon Jun 07, 2021 1:15 pm
First post
Just discovered that the LHF door's locking does not lock or unlock with the key. Central locking on and off is fine but nothing happens in key mode....
Last post
In turn, I bought a full set of lock actuators from a GTi a while ago to repair my faulty system, and it only had one 'master' motor, whereas the...
5 Replies
826 Views
Last post by Culasse
Thu Jun 10, 2021 1:57 pm
Shaky wing mirror
Replies: 5
by
RobC »
Mon Jun 07, 2021 5:47 pm
First post
The glass in my offside wing mirror is very juddery.
Is this an easy fix? Will I need a whole new wing mirror or can I just replace the glass and...
Last post
Thanks- how is the mirror attached to the body, does it just pop off?
If I remember correctly. A couple of screws holds it in place
Remove the...
5 Replies
1226 Views
Last post by Pcheaven
Tue Jun 08, 2021 9:36 pm
Alterntor rebuilds
Replies: 7
by
womble3go »
Wed Jun 02, 2021 4:37 pm
First post
Hello All,
Just wondering if any one has got their alternator rebuild if so, were did you use, I am guessing that I will have to post.
Mine has...
Last post
Might be better on the phone in my experience!
Agreed. He's oldschool. Comes across a bit off too, but he's not.
Yes, this! I really like him...
7 Replies
1203 Views
Last post by jamescarruthers
Sat Jun 05, 2021 8:30 pm
1992 BX 19 tzi leaking
Replies: 6
by
pdl1989 »
Fri Jun 04, 2021 12:43 pm
First post
So... there is a bright green fluid leaking underneath the front end of the car. It seems to start dripping once the hydraulics kick in and the car...
Last post
Thanks for all the replies.
6 Replies
931 Views
Last post by pdl1989
Sat Jun 05, 2021 12:10 am
Stereo System
Replies: 5
by
pdl1989 »
Mon May 31, 2021 4:41 pm
First post
I have a 92 Citroen BX tzi. I want to install a good stereo system and am looking for suggestions on something that would suit, and am curious to...
Last post
Thanks for the responses. Now I’ve got a general idea of what needs doing.
5 Replies
868 Views
Last post by pdl1989
Thu Jun 03, 2021 3:46 pm
Rich running BX 16 Valve
Replies: 22
by
bx16v »
Tue May 04, 2021 3:34 pm
First post
Hi all
After a bit of advice if anyone has had experience of it previously.
My 16V seems to be running a bit rich on fuel, it's failed it's MOT on...
Last post
+1 on the AFM plug wiring. Definite weak point.
Thanks for the tip on the Polevolt tip, mine died a while back and I’ve got a temporary solution at...
22 Replies
3152 Views
Last post by RobC
Tue Jun 01, 2021 11:09 am
Adding a temperature gauge
Replies: 6
by
white exec »
Fri May 28, 2021 10:46 pm
First post
Have managed to find a coolant temperature gauge instrument pod, which is on its way to me.
Need to lay in the necessary sender/sensor for the water...
Last post
Will be doing just that Rob - using the lower temp switch (105°C iirc) for a visible warning :!: .
While looking through pages at gauge sensor info...
6 Replies
810 Views
Last post by white exec
Sat May 29, 2021 5:32 pm
Are these part numbers interchangeable, how can I tell?
Replies: 5
by
Pcheaven »
Mon May 24, 2021 6:45 pm
First post
Both are apparently bottom hoses for no air con bx
95640596 - this looks identical
And 96164120 - I believe this is the correct part no for my bx...
Last post
Thanks. I have been googling daily
The above link works until you change to English. Then the part can’t be found, or gets removed from shopping...
5 Replies
767 Views
Last post by xantia_v6
Mon May 24, 2021 9:18 pm
Replacement coolant hoses
by
white exec »
Mon May 10, 2021 7:16 pm
When not possible to find a replacement/aftermarket hose, there are a good few companies who stock universal or general purpose hoses, covering...
0 Replies
2886 Views
Last post by white exec
Mon May 10, 2021 7:16 pm
Easy or a pain : replacing clutch cable 1.6 petrol
Replies: 11
by
Pcheaven »
Tue May 04, 2021 10:46 pm
First post
My clutch isn’t as smooth as I would like , so am considering replacing the clutch cable
I have heard the diesels cable is a pain to replace with...
Last post
Even taking the driver's seat out and removing the steering wheel and lower shroud for decent access it's a pig of a job.
Naturally I took the...
11 Replies
1212 Views
Last post by Pcheaven
Sun May 09, 2021 8:55 pm
Saggy offside rear
Replies: 19
by
RobC »
Sat Apr 24, 2021 1:41 pm
First post
My BX rides 5cm lower on the offside rear than the nearside. Front height is fine both sides. Tyres all good.
What’s causing this then..? Cylinders...
Last post
Good bit of detective work. Let's see what you find.
19 Replies
1792 Views
Last post by white exec
Thu Apr 29, 2021 7:02 am
Pressure regulator leaks
Replies: 5
by
Culasse »
Sun Apr 25, 2021 11:27 pm
First post
My BX is languishing in its garage at the moment and is in need of an MOT.
While checking underneath yesterday I noticed a small green leak from the...
Last post
Rutter and David, yes I am sure you are right. I was just looking for something quick and easy instead of long and messy. But having looked again at...
5 Replies
744 Views
Last post by Culasse
Wed Apr 28, 2021 11:12 pm
Is it possible to date my spheres from the markings ?
Replies: 4
by
Pcheaven »
Fri Apr 23, 2021 3:36 pm
First post
I am curious as to their age
Can anyone advise please ?
Yes. I see the obvious possible date marking. Just not sure if it actually a date or just...
Last post
They are Am-tec part no. Motor factor issue.
I suspect that is date of manufacture.
Thank you very much.
4 Replies
570 Views
Last post by Pcheaven
Fri Apr 23, 2021 6:39 pm
Haynes BX manual
Replies: 1
by
white exec »
Wed Apr 21, 2021 9:43 am
First post
Have just bought a more updated Haynes manual for the BX - #908, Petrol, the 1995 edition. My earlier one was 1991.
Found it on Amazon UK for less...
Last post
Sound like an idea for me
I have a Haynes manual. Good hard back covers s
Pictures of the 1.6 petrol engine are none existent.
Will check the...
1 Replies
470 Views
Last post by Pcheaven
Wed Apr 21, 2021 11:55 am
Heater control panel illumination
Replies: 5
by
white exec »
Fri Apr 09, 2021 11:33 am
First post
For a Mk2, am I right in thinking that access to the bulbs is by removing the control knobs?
I've tried pulling them off - even with some padded...
Last post
Success. Piece of gaffer-tape on the knobs to protect them, and a sharp tug with the pliers.
Some very dry spring clips in the knobs, likely never...
5 Replies
681 Views
Last post by white exec
Mon Apr 19, 2021 12:15 pm
Fitting radio/cd
Replies: 7
by
FroggyBX »
Mon Apr 19, 2021 11:43 am
First post
I'm retired in France and recently bought a 1991 Citroen BX 'Image' 1.6 as a second car 'pour les week-ends'. Doesn't have a radio/cd player so I...
Last post
Thanks for that tech advice.
7 Replies
779 Views
Last post by FroggyBX
Mon Apr 19, 2021 12:14 pm
A/C - conversion to R134a
Replies: 16
by
white exec »
Tue Apr 13, 2021 8:21 am
First post
About to get stuck into this, on the R12 factory system on the 19D Millesime.
Have read up on some of the past threads, including Dragon Man's 2016...
Last post
It claims to be a drop-in replacement for R-12, and compatible with mineral oil and 'other' compressor oils.
It's 60% R-134a, according to the MSDS...
16 Replies
1882 Views
Last post by white exec
Thu Apr 15, 2021 9:32 pm
No fast idle on cold start (91 1.6)
Replies: 4
by
Pcheaven »
Sat Apr 03, 2021 4:10 pm
First post
Seems Like a simple issue. I hope
From cold start the engine does not fast idle and requires me to hold accelerator depressed a little for a while....
Last post
I located the fast idle screw, and gave it an 1/8th of a turn. that appears to have sorted the problem. cold idle is now just over 1100.
Have no...
4 Replies
691 Views
Last post by Pcheaven
Tue Apr 06, 2021 3:33 pm
How long should spheres last
Replies: 21
by
Pcheaven »
Sat Apr 03, 2021 10:41 pm
First post
Sorry.
Newbie question. I tried to find the answer here and couldn’t
I think mine are the original ones, and the car doesn’t handle speed bumps...
Last post
👍
I was considering an lhm cleanse.
It’s on the list for Friday
21 Replies
2441 Views
Last post by Pcheaven
Mon Apr 05, 2021 7:39 pm
are all manual door mirrors the same?
Replies: 5
by
Pcheaven »
Thu Apr 01, 2021 8:28 am
First post
some advise please.
As per subject, the passenger side door mirror on my Meteor has a broken control arm.
Ca I use any manual mirror from any BX....
Last post
if you have the old arm you could try some glue.
5 Replies
544 Views
Last post by Tim Leech
Thu Apr 01, 2021 5:20 pm
Can you drive a 4x4 if the 4wd system is faulty
Replies: 4
by
Pcheaven »
Tue Mar 16, 2021 7:56 pm
First post
Curious
Can you still use as a daily runner a 4x4 if the 4wd system is broke ( prop shaft splines and transfer box issues ) whilst you source...
Last post
Ive heard that if the transfer box doesnt work then the car wont move....
4 Replies
836 Views
Last post by Tim Leech
Tue Mar 30, 2021 12:46 pm
Interior Lights...
Replies: 7
by
Photeauart »
Mon Jan 02, 2017 12:58 pm
First post
Any pointers please… 91reg TZi… interior lights were intermittent so cleaned/checked door switches. All good and they started working ok. Came on...
Last post
Interior lights timer — LHD cars
Needed to locate this today.
For LHD, just lift out the upper glove compartment (4 plastic plugs + 2 cross-head...
7 Replies
2548 Views
Last post by white exec
Mon Mar 22, 2021 12:28 pm
Fog light and rear demister stuck on
Replies: 10
by
bussell »
Thu Mar 04, 2021 6:34 pm
First post
So I have temporarily remedied this by removing fuses, which means no horn.
I turned fog light and demister on recently and now they won’t turn...
Last post
Surprising that both of these switches would fail, especially as they (normally) get relatively sparse use, as switches go.
You might be lucky, and...
10 Replies
3904 Views
Last post by white exec
Tue Mar 16, 2021 4:46 pm
Front indicator removal
Replies: 12
by
white exec »
Mon Mar 08, 2021 11:00 am
First post
Am I right in thinking that it's necessary to first remove a headlight, to get access to securing bolt for the late-type indicator unit? Early units...
Last post
While by the letter of the law that wouldn't be legal here, and the UK has its own rules on vehicle lighting, that looks so 'Factory' i bet no one...
12 Replies
22224 Views
Last post by Vanny
Sun Mar 14, 2021 4:58 pm
BX mudflaps
by
white exec »
Sun Mar 14, 2021 11:16 am
Can anyone recommend some moulded/contoured flexible rubber mudflaps that are a good fit for the car?
Good few Universal-fit items on the web, but...
0 Replies
2687 Views
Last post by white exec
Sun Mar 14, 2021 11:16 am
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum