Hello all, may be looking for back box for my valver
seem to be thing on the ground walkers seem to
have run out only option stainless steel.
one with straight tail end would be good.
valver phase 2 exhaust
- greendale65
- BXpert
- Posts: 509
- Joined: Sun Mar 02, 2014 5:52 pm
- x 20
valver phase 2 exhaust
Last edited by greendale65 on Fri Jul 07, 2017 3:11 pm, edited 1 time in total.
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: valver phase 2
You can take an estate backbox and cut the tailpipe off, but it won't be all pretty and chrome (or black, if you're going OE) unless you bolt a trim on.
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
Re: valver phase 2
It can look OE good using an estate back box. The Doc did one for my GTi and as the cut pipe comes out too straight and can therefore knock on the bumper he cut a V out of the pipe too and welded the V shut so it then had a smart bend to it. The Doc though can be considered a bit of a magician in practical matters pertaining to the BX and bigger stuff!
1991 BX19GTi Auto