Welding
Welding
I need to do some welding to the car for the MOT I know about disconnecting the battery and start and alternator, but never had one with ABS do I need disconnect the ABS unit or will it be ok? Thanks for the help on this.
-
- Over 2k
- Posts: 6417
- Joined: Sun Jul 03, 2005 9:36 pm
- Location: Fareham, Hants
- My Cars: Too many to list
- x 88
- Contact:
Re: Welding
I've never done it on mine, but it's so easy to do you might as well!
One third of a three-spoke BX columnist team for the Citroenian magazine.
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
CCC BX registrar: The national BX register - click to submit a car!
1983(A) 16TRS (Rouge Valleunga)
1990(H) 16Valve (Rouge Furio)
-
- Confirmed BX'er
- Posts: 67
- Joined: Sun Sep 18, 2016 10:38 pm
- Location: Sweden
- My Cars: Citroen BX 16 Valve 89, Citroen C5 HDI 163 -12
- x 1
Re: Welding
If so even the engine computer as well? But I don´t think it´s necessary. Most important is to be careful where to put the earth clamp. As close to the welding area as possible and with good contact.
/Mats
/Mats
- Tim Leech
- Over 2k
- Posts: 15578
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 148
Re: Welding
Its only a 10mm nut and as long as the radio is not coded its probably wise.
Lots of Motors, mostly semi broken....