breaking TZD saloon H registration

[NeilGP]

I'm after gear linkage 2 in the pic below


The one on my BX keeps popping off, presently held by tywraps
PM me how much

[Mike E (uk)]

Tim, i have a box full of rear view mirrors which I could not bring myself to bin.

I'll bring one to the ccc.

Mike

[Tim Leech]

Tim, i have a box full of rear view mirrors which I could not bring myself to bin.

I'll bring one to the ccc.

Mike

Thanks Mike! the one in the DTR doesnt reflect much anymore and wobbles something cronic.

[KevR]

I am after a few bits too.
Assuming it has power steering there is a clip, usually white plastic, which holds the u shaped hydraulic hose pipe that goes between the flow distributor and the pressure regulator. It sits on the LHS beneath the radiator and air filter and clips into the chassis leg. It might be tricky to remove without breaking it but I really need one. Mine is missing and the pipe makes a continual rattling noise which cant be doing the pipe any good as well as driving me mad too.

A bit of plumbing pipe insulation round the pipe, then cable tie it to the remains of the plastic bracket/clip - works a treat.

[rugmuncher]

Greetings. I would love the fuel tank sender unit, (under the back seat). Please let me know price and postage to Huddersfield, Cheers.

[RobC]

Not sure if I've got the terminology right but...

I would love as many of the interior A and C pillar rivets (ie the white plastic things that hold the black trim onto the A and C pillars) as possible please - think I need about 10!
3 of the boot trim side panel plastic washers/nuts that hold the panels in place
Front ashtray (if its got the smooth spring still working)
Also if you have it fitted, the rear 12v accessory socket that appears between the headphone points on the posher models.

Will PM contact details.

Many thanks
Rob.

[Birotor]

For Rob C
The power socket on the tail of the console on my CX was a DIN socket not Cig ltr size. I have a source for these and DIN plugs... which are U looking for DIN or Cig Ltr. What size is the hole in the console. In rally cars all accessory skts are DIN and they are much superior and good quality plugs that fit both are available...

[mat_fenwick]

DIN...much superior

Agreed, and that is what is also fitted in the higher spec. BXs.

[Jaba]

A bit of plumbing pipe insulation round the pipe, then cable tie it to the remains of the plastic bracket/clip - works a treat.

I have tried all that Kevin. Eventually the insulation wears through and/or the cable ties break and I don't have any plastic clip at all to fix any thing to. I have made up a metal clip but eventually I end up with metal to metal rattling and I am fed up with it !!

[CGATCX25GTITURBO]

Could change them to rose joints, like I've done to my CX

A bit of work but worth it

[Birotor]

Mat: I guessed it must be a DIN skt. Rob C if you don't get what you are after let me know by PM or on Forum.

[chris]

would like the black plastic cover for the rad with the air divert to the intercooler.
cheers

[Defender110]

Could change them to rose joints, like I've done to my CX

A bit of work but worth it

Lovely job.

[rabbercelt]

car has now gone although I've kept some parts that people haven't asked for -mainly body and electrical