inlet manifold gaskets gti 8v h reg
-
rutter123
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 138
inlet manifold gaskets gti 8v h reg
anyone got a pic or a link where i can get 1 for this, as i got one from gsf and its wrong, none were fitted so no idea wot the o/e look like, are they 2 piece or 1?
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
-
CGATCX25GTITURBO
- BXpert
- Posts: 202
- Joined: Tue Apr 12, 2011 10:57 pm
- Location: in front of the PC Hull East Yorks
Re: inlet manifold gaskets gti 8v h reg
didn't think they had one 
missing my 1992 BX19TGD
1987 BX19 GTI
CX25 GTI TURBO CGAT 86 CGAT
19TD temp 2 Xantia estate
600 Bandit 97
ZX12R 00
1987 BX19 GTI
CX25 GTI TURBO CGAT 86 CGAT
19TD temp 2 Xantia estate
600 Bandit 97
ZX12R 00
-
4B4
- New Member
- Posts: 8
- Joined: Thu Feb 03, 2011 12:14 pm
Re: inlet manifold gaskets gti 8v h reg
Mine did not have one either. So presumably they don't need one.
-
Jaba
- 1K Away
- Posts: 1957
- Joined: Tue Jul 05, 2005 7:54 am
- Location: Usually in the garage
- My Cars: BX GTi, C3 Auto
- x 97
Re: inlet manifold gaskets gti 8v h reg
It seems incroyable but Citroen never fitted one. You just seal it with silicone which seems to do the job well.
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.
-
rutter123
- Over 2k
- Posts: 2695
- Joined: Sun Sep 02, 2012 9:54 pm
- Location: South Lincs
- My Cars: 90 Bx Tzd turbo ven red 295k
74 D Super 5 black
05 Volvo V50 2.0d 180k
65 Peugeot Boxer work van 280k - x 138
Re: inlet manifold gaskets gti 8v h reg
as a temp measure i made a couple from gasket paper with a smidge of silicone, i should just leave it as is then. misleading tho as they are listed on the bay and elsewhere, and im sure a contributary air leak was happening at this joint as the idle settled a little more after fitting a gasket and sealer.
90 BX Tzd turbo 294k SORN undergoing major surgery
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability
90 BX Tzd turbo estate 46k awaiting surgery
65 Peugeot Boxer Van the new workhorse
52 Toyota Rav4 180k Bulletproof Jap reliability