Help!
would someone be kind enough to let me know which other car alloys will drop straight onto my 16TRS meteor.
I understand 4x108 and 5.5 J, but can't seem to find 'offset' info. Thanks DT
alloys
-
- Over 2k
- Posts: 15625
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 174
Re: alloys
Peugeot 205/309/405, zx and xantia
If it's a meteor and has original hubcaps keep them safe as they are rare.
If it's a meteor and has original hubcaps keep them safe as they are rare.
Lots of Motors, mostly semi broken....
-
- Confirmed BX'er
- Posts: 33
- Joined: Tue Apr 03, 2012 10:24 pm
Re: alloys
Unfortunately they are gone.
-
- New Member
- Posts: 6
- Joined: Sat Dec 31, 2016 3:46 pm
- Location: Chelmsford
- My Cars: Citroen BX 1.6 TGS Meteor. H reg.
Citroen Traction Avant 11B 1952 LHD.
Re: alloys
My Meteor has ZX alloys on it. I think previous owner must have sold the original hubcaps.
-
- BXpert
- Posts: 318
- Joined: Wed Oct 05, 2011 10:44 pm
- Location: Ebbw Vale, Fa and Dihewyd
- My Cars: Citroen BX 16V, BX Van 16V, Visa GTI, CX Ambulance Turbo diesel, Xsara VTS Phase 1 and 2, Lotus Elan 1970, Clan Crusader, C8 2l petrol, 1982 GSA Pallas, 1974 GS Birotor
Re: alloys
Should have an offset of 16–20mm. Peugeot 205 GTI alloys in 14 and 15in will fit; the nicest in my opinion are the 15in C5 'steely' alloys which are half the weight of the standard alloys and thus reduce the unsprung weight rather than increase it which most 15in alloys will do…
Hilary Stone
http://www.Hilarystone.com
Period bikes, frames and parts
1985 Citroen CX Ambulance, 1989 Citroen BX 16V, 1987 Citroen Visa GTI, 2008 Citroen C8 2l petrol, Citroen BX Van 16V, Clan Crusader, 1970 Lotus Elan, Citroen Xsaras VTS phase1 and Phase 2, Citroen GSA, GS Birotor
http://www.Hilarystone.com
Period bikes, frames and parts
1985 Citroen CX Ambulance, 1989 Citroen BX 16V, 1987 Citroen Visa GTI, 2008 Citroen C8 2l petrol, Citroen BX Van 16V, Clan Crusader, 1970 Lotus Elan, Citroen Xsaras VTS phase1 and Phase 2, Citroen GSA, GS Birotor
-
- Confirmed BX'er
- Posts: 33
- Joined: Tue Apr 03, 2012 10:24 pm
Re: alloys
so, do you all think saxo VTR 14" will fit?
-
- Over 2k
- Posts: 15625
- Joined: Tue Apr 15, 2008 11:12 am
- Location: Derbyshire
- My Cars: Various
- x 174
Re: alloys
Yes but they don't look right, Peugeot 206 alloys don't look too bad.
Lots of Motors, mostly semi broken....
-
- Confirmed BX'er
- Posts: 33
- Joined: Tue Apr 03, 2012 10:24 pm
Re: alloys
last question- will 14" 6J alloys go straight onto the bx?
-
- BXpert
- Posts: 318
- Joined: Wed Oct 05, 2011 10:44 pm
- Location: Ebbw Vale, Fa and Dihewyd
- My Cars: Citroen BX 16V, BX Van 16V, Visa GTI, CX Ambulance Turbo diesel, Xsara VTS Phase 1 and 2, Lotus Elan 1970, Clan Crusader, C8 2l petrol, 1982 GSA Pallas, 1974 GS Birotor
Re: alloys
It will depend on the offset – many with the correct 108mm BCD 4stud fitting have an offset which is far too much for the BX – if they are specified to fit Ford they will normally have an offset between 34 and 42mm…
Hilary Stone
http://www.Hilarystone.com
Period bikes, frames and parts
1985 Citroen CX Ambulance, 1989 Citroen BX 16V, 1987 Citroen Visa GTI, 2008 Citroen C8 2l petrol, Citroen BX Van 16V, Clan Crusader, 1970 Lotus Elan, Citroen Xsaras VTS phase1 and Phase 2, Citroen GSA, GS Birotor
http://www.Hilarystone.com
Period bikes, frames and parts
1985 Citroen CX Ambulance, 1989 Citroen BX 16V, 1987 Citroen Visa GTI, 2008 Citroen C8 2l petrol, Citroen BX Van 16V, Clan Crusader, 1970 Lotus Elan, Citroen Xsaras VTS phase1 and Phase 2, Citroen GSA, GS Birotor