Easy or a pain : replacing clutch cable 1.6 petrol

BX Tech talk
Pcheaven
BXpert
Posts: 163
Joined: Tue Mar 09, 2021 12:34 am
Location: Kent
My Cars: Landrover discovery sport 2020
Previously ipace/discovery 5/velar and many others including 2 bx gti back in early 1990
x 6

Easy or a pain : replacing clutch cable 1.6 petrol

Post by Pcheaven »

My clutch isn’t as smooth as I would like , so am considering replacing the clutch cable

I have heard the diesels cable is a pain to replace with the engine still in situ - does anyone have any experience or thoughts on changing one on a. 1.6 petrol RHD?

Thanks muchly.
BX Meteor. Sub 20000 miles. Very Original.

ToDo list.

1. ̶G̶e̶t̶ ̶c̶a̶m̶ ̶b̶e̶t̶ ̶e̶t̶c̶ ̶r̶e̶p̶l̶a̶c̶e̶d̶ ̶e̶t̶c̶
Have a GnT
2. G̶e̶t̶ ̶t̶h̶e̶ ̶r̶a̶d̶i̶o̶ ̶t̶o̶ ̶w̶o̶r̶k̶.̶ ̶
Have a GnT
3. Adjust the clutch
Have a GnT
4. Clean LHM tank then a complete flush
Have a GnT
5. Wash, clay bar then ceramic coat paintwork.
Have a GnT
6. Replace rear spheres
Have a GnT
7. Replace bottom hose

User avatar
Jaba
1K Away
Posts: 1635
Joined: Tue Jul 05, 2005 7:54 am
Location: Usually in the garage
My Cars: BX GTi, C3 Auto
x 30

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by Jaba »

Do you mean its a bit stiff. First thing to check is that the pivot on the gearbox is well lubed and the same for the clutch pedal too.
Changing the cable is not ever described as easy as its very fiddly to attach it through the bulkhead to the top of the pedal. There is a pesky locking bush to set in place requiring you to be a contortionist and that is after you have removed the 3x 8mm screws holding the rubber cover on the bulkhead.
Then after you have done all that you may find that it is the clutch itself that is not "smooth".
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.

Pcheaven
BXpert
Posts: 163
Joined: Tue Mar 09, 2021 12:34 am
Location: Kent
My Cars: Landrover discovery sport 2020
Previously ipace/discovery 5/velar and many others including 2 bx gti back in early 1990
x 6

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by Pcheaven »

Jaba wrote:
Tue May 04, 2021 11:01 pm
Do you mean its a bit stiff. First thing to check is that the pivot on the gearbox is well lubed and the same for the clutch pedal too.
Changing the cable is not ever described as easy as its very fiddly to attach it through the bulkhead to the top of the pedal. There is a pesky locking bush to set in place requiring you to be a contortionist and that is after you have removed the 3x 8mm screws holding the rubber cover on the bulkhead.
Then after you have done all that you may find that it is the clutch itself that is not "smooth".
It’s not stiff, just not a smooth action on the pedal. Everything looks lubed.

I did suspect it would be a pain to do, and as you note there is the possibility it’s the clutch that needs doing possibly it hasn’t aged well.
BX Meteor. Sub 20000 miles. Very Original.

ToDo list.

1. ̶G̶e̶t̶ ̶c̶a̶m̶ ̶b̶e̶t̶ ̶e̶t̶c̶ ̶r̶e̶p̶l̶a̶c̶e̶d̶ ̶e̶t̶c̶
Have a GnT
2. G̶e̶t̶ ̶t̶h̶e̶ ̶r̶a̶d̶i̶o̶ ̶t̶o̶ ̶w̶o̶r̶k̶.̶ ̶
Have a GnT
3. Adjust the clutch
Have a GnT
4. Clean LHM tank then a complete flush
Have a GnT
5. Wash, clay bar then ceramic coat paintwork.
Have a GnT
6. Replace rear spheres
Have a GnT
7. Replace bottom hose

User avatar
Kitch
Over 2k
Posts: 6300
Joined: Sun Jul 03, 2005 9:36 pm
Location: Fareham, Hants
My Cars: Too many to list
x 60

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by Kitch »

Pain in the arse. It's the pedal end that's the problem, everything else is easy.
CCC BX monthly column writer bloke thingy - bx@citroencarclub.org.uk

The national BX register - click to submit a car!

1983 16TRS (Sunrise red) - 1987 GTi 16v (Black) - 1989 16 Valve (Venetian red) - 1990 16 Valve (Venetian red)

RobC
BXpert
Posts: 506
Joined: Tue Aug 15, 2006 11:15 am
Location: East London
My Cars: 1991 Citroen BX 16v
x 16

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by RobC »

Even taking the driver's seat out and removing the steering wheel and lower shroud for decent access it's a pig of a job.

When I changed my pedal box last summer due to the usual floppiness in the throttle pedal, I discovered my clutch cable wasn't seated "correctly" (but had operated fine for years). After spending about four fruitless hours trying to put it back in the "correct" way I just gave up and reinstalled it as it had been. Naturally I took the opportunity to give it all a very good oiling and greasing on the moving parts etc while I was there, but if you want a proper job doing (and from your posts thus far it sounds like you're a perfectionist!) then if I were you I'd leave well alone. Get your head down there and give everything a good greasing/oiling though, and as others have said ensure the pivot at the gearbox end is also nicely greased, and fingers crossed you'll have years of reliable service to come.
1991 Citroen BX 16v

User avatar
Jaba
1K Away
Posts: 1635
Joined: Tue Jul 05, 2005 7:54 am
Location: Usually in the garage
My Cars: BX GTi, C3 Auto
x 30

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by Jaba »

Just to reinforce Rob's sage comments here is my clutch cable story to convince you to leave well alone.
For years my GTi had a stiff clutch. I changed the cable twice and the clutch once and it was still hopeless compared to my TDs. So I gave up on the push rod type clutch and changed it over to the superior TD and 16v pull type actuating lever in the gearbox and was finally rewarded with a smooth clutch.
When you keep a car for more than 20 years there is always plenty of time to work your way through the to do list. You never get to the bottom of course because it just keeps getting added to as fast as you cross stuff off. Must fix those LHM leaks.
The Joy of BX with just one Citroën BX to my name now. Will I sing Bye Bye to my GTI or will it be Till death us do part.

Pcheaven
BXpert
Posts: 163
Joined: Tue Mar 09, 2021 12:34 am
Location: Kent
My Cars: Landrover discovery sport 2020
Previously ipace/discovery 5/velar and many others including 2 bx gti back in early 1990
x 6

Re: Easy or a pain : replacing clutch cable 1.6 petrol

Post by Pcheaven »

many thanks all, given the above comments I may back burner this task and the new clutch cable I have.

For now, this weekend I will attempt to lube the cable and see what that yields

again, thanks everyone :)
BX Meteor. Sub 20000 miles. Very Original.

ToDo list.

1. ̶G̶e̶t̶ ̶c̶a̶m̶ ̶b̶e̶t̶ ̶e̶t̶c̶ ̶r̶e̶p̶l̶a̶c̶e̶d̶ ̶e̶t̶c̶
Have a GnT
2. G̶e̶t̶ ̶t̶h̶e̶ ̶r̶a̶d̶i̶o̶ ̶t̶o̶ ̶w̶o̶r̶k̶.̶ ̶
Have a GnT
3. Adjust the clutch
Have a GnT
4. Clean LHM tank then a complete flush
Have a GnT
5. Wash, clay bar then ceramic coat paintwork.
Have a GnT
6. Replace rear spheres
Have a GnT
7. Replace bottom hose