WANTED: wheel bolts for Speedlines
-
Mike E (uk)
- 1K Away
- Posts: 1115
- Joined: Sun Aug 14, 2005 9:10 am
- Location: High Wycombe, Bucks
- x 1
Re: WANTED: wheel bolts for Speedlines
CX alloy wheel bolts are the correct size too.
la BX 16 soupapes: sachez apprecier avec moderation.
It might be clever now, but it won't be in the morning!
It might be clever now, but it won't be in the morning!
-
Phil Peters
- Confirmed BX'er
- Posts: 46
- Joined: Sun Feb 03, 2013 7:15 pm
- Location: Warwickshire, UK
Re: WANTED: wheel bolts for Speedlines
Apologies for the delayed reply, busy month at work in the run up to Xmas.
Many thanks for the clarification on the different length bolts, an essential safety tip.
My spare wheel will still be a steelie so I'll need to keep a few steelie bolts in the glove box for the inevitable puncture.
Cheers,
Phil
Many thanks for the clarification on the different length bolts, an essential safety tip.
My spare wheel will still be a steelie so I'll need to keep a few steelie bolts in the glove box for the inevitable puncture.
Cheers,
Phil
1992 BX19 TGD (aka Maurice), N/A diesel, silver with Zenith trim.
-
Way2go
- Over 2k
- Posts: 7279
- Joined: Fri Jan 13, 2006 3:15 pm
- Location: RCoBerkshire
- x 2
Re: WANTED: wheel bolts for Speedlines
You're welcome, it was something I learned from first hand experience.Phil Peters wrote: Many thanks for the clarification on the different length bolts, an essential safety tip.
My spare's still a steelie too but rather than clog up the glove box, the 4 bolts (wrapped in an ASDA bag) live in the boot cubby hole by the wheelbrace.Phil Peters wrote: My spare wheel will still be a steelie so I'll need to keep a few steelie bolts in the glove box for the inevitable puncture.
1991 BX19GTi Auto