Well, i assume he did some sort of Cit specialist visit just to tighten the accumulator sphere on the Red TizzeeDee.
It was not just tight, it was...
Last post
i have adapted a pair of regular car ramps mounted on 8 inch think timber planks, just gives enough extra height for under body work when working at...
here is a photo of my lovely Bx 16 Meteor Auto from 1991. I am the second owner from new and the car has never been off the road. In the last 5 years...
Last post
Then most of my leaks have been strutty ones. This fits the pattern being established and the recent gusher, now magically resolved. I wonder if...
With the engine transplant from the TD estate I am breaking completed into the #Hurricane it was time to brave an MOT.
Problem: Although the engine...
Last post
The garage where I MOT the XM are very good. The MOT tester did his apprenticeship at a Citroën garage. Plus there is usually a Willys Jeep in having...
I'm considering a wheel swap but am having real trouble making up my mind whether to or not! I've got a slight preference for the P1 wheels I think ,...
Last post
For me the red with black trimming defines the colour choice. There is no grey on the car but there is shine so it has to be silver for a balanced...
Took the BX to my local Citroen specialist on Wednesday morning for a check over before its annual MOT,i helped check the relevant items,greased the...
Last post
Should I insist that it's set to 3 degrees down as per the label or allow them to be set to 2 degrees down as per the test device ?
all the spheres on the tzdt daily, are becoming a bit bouncy, can i take the 4 almost new spheres from the currently redundant tgd and fit these onto...
Why does a TZD 1.9 have a steel bonnet and most of the rest have plastic? Is it to have more mass to attempt to quieten the engine noise down? Seems...
Last post
Getting back to the noise question, i believe the n/a is noisier, not because of the bonnet, the gearing is lower so its revving more at the same...
I'll get to the windows shortly!
Having bought a turbo-diesel estate a few months ago as a project, already running the GTI and 1.9 diesel, it turned...
Last post
This is just an idea. the only stuff I know of that bonds glass well are the little kits to re stick rear view mirrors (the ones that stick to the...
Asides a few articles from Mr Dollywobbler the BX does seem not get much press coverage. Its 30th anniversary came and went without a mention. Where...
Last post
But it was a BX, and it was a UK rally. That'll do.
red, with diesel stains down the side, being driven flat out up the M6
:oops: Have I been...
removed the inlet manifold to fit new gaskets (of which none were fitted) and gave the throttle body a good clean up as well, re assembled as per...
Last post
The pressure regulator maintains the rail pressure at a fixed offset relative to the pressure in the intake manifold - hence the pipe connecting the...
does anyone know of anywhere where i can get the front spheres for the tzd re-gassed within reasonable distance from Heathrow, berks, bucks, surrey,...
Last post
yes they are more DS, i have spoke with darren recently and they dont do re-gassing there.
...does your BX do in a year? I do about 25k miles in total (although a fifth of that are in the Discovery and the van) so have been clocking up the...
Last post
Is this BS ? Although I have heard that old diesel goes bad which makes me wonder if I should dump what is left in the tank before I start it up...
Just wondering where these dashboard colours available in the UK - blue in a mk1 and brown in a mk2 (I've seen brown in a mk1)? You wouldn't see...
Last post
That is interesting about Pantone. Yes I still have the (too old for accuracy they claim) book of swatches which cost about £105 in 86..... . In the...
i suspect the turbo on the tzd is on its way out as oil consumption is higher than usual and i can feel some light play on the turbine shaft, i guess...
Last post
Hi Folks,
rutter 123 wrote:
any info on adjustment for fuel pumps or any tips on changing turbo settings would be good.
required for a mk2 bx the first 6 inches of the o/s front chassis rail and associated inner wing to repair the damage on the forthcoming gti, anyone...
The Estate gained its MOT this morning. Been off the road for 51/2 years so the first drive was going to be interesting. That got kind of lost in...
Last post
There are lady BXers? Bit different from microcars then. 99% male occupation.
There are indeed! I can think of 4 or 5 present this weekend, although...
Sophie passed her MOT today for the 2nd time in my ownership with ease. No advisories either, the garage were impressed with her.
I have promised her...
Last post
I keep saying this but she is driving really well at the moment.....
A proper register would be great, one of those things that would make this club more legitimate in a way. I'm always surprised that there are so many...
An idea that's been considered by a few before is to reduce the octopus to no more than 12 in length and use plastic piping and pneumatic self...
Last post
I don't know if you saw Rmattila's link down the page, but the idea is tempting to me for the next time. One length of standard pipe and you can fix...
As I approach my 25th year of BX driving I thought back a little...
First BX I ever saw was in 1981 (yes not 82) a British Y plate charcoal grey...
Last post
The good news, Athena now MOT'd and ready to roll. I will need new sills and o/s inner wing welding for next year I think. Anyone used Danny Masters...
I thought i'd make a thread consolidating the trim levels found on BX's, as it's all jumbled up in my head! Hopefully they are in ascending order of...
Last post
It could get more complicated than that, as in the past Citroen even made RHD models specific to the Channel Islands!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
