Ball joint protector
-
- BXpert
- Posts: 199
- Joined: Wed Jun 10, 2009 12:30 pm
Ball joint protector
Does anybody know if the balljoint protectors are available? I managed to damage one of mine. Thanks.
Regards Graham
Regards Graham
-
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
Re: Ball joint protector
http://www.beal.org.uk/automotive/ball- ... at_89.html" onclick="window.open(this.href);return false;
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
Re: Ball joint protector
GSF do an assorted kit reasonably priced, and they sell top ips for the kit
regards malcolm
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
- Vanny
- Merseyside resident
- Posts: 3582
- Joined: Tue May 17, 2005 11:48 pm
- Location: BXProject
- My Cars: BX 16v Ph2 - Jazz
BX 16v Ph2 - XPO - x 82
- Contact:
Re: Ball joint protector
I was thinking as i read the OPs post that this is referring to the metal and later plastic shield that protects the bottom ball joint from stones etc which to my knowledge is not available in metal but is available in plastic, possibly from another model, maybe C15?
-
- 1K Away
- Posts: 1767
- Joined: Mon Apr 12, 2010 8:46 pm
- Location: Normandy
- My Cars: It's all in my signature
- x 4
Re: Ball joint protector
I was thinking the same. They're still available - suspect they're the same for 405 Peugeot as well? Didn't realise they'd changed from steel to plastic though.
I just ordered some from http://www.citroencarparts.net" onclick="window.open(this.href);return false; for about a fiver each - probably no cheaper than walking into a dealer, but postal service is handy and they're very helpful.
I just ordered some from http://www.citroencarparts.net" onclick="window.open(this.href);return false; for about a fiver each - probably no cheaper than walking into a dealer, but postal service is handy and they're very helpful.
1990 BX TZD Estate ('the grey one', 1991 BX TZD Estate ('the white one'), 1982 2CV6 Charleston (in bits), 1972 AZU Serie B (2CV van), 1974 HY72 Camper, 1990 Land Rover 110 diesel LWB, 1957 Mobylette AV76, 1992 Ducati 400SS, 1966 VW Beetle, 1990 Mazda MX-5, 1996 Peugeot 106D, 1974 JCB 2D MkII, 1997 BMW R1100RS, 1987 Suzuki GSX-R1100, 1978 Honda CX500A, 1965 Motobecane Cady, 1988 Honda Bros/Africa Twin, 1963 Massey Ferguson 825, and a lot of bicycles!
Re: Ball joint protector
that was the first thought that entered my tiny brain, but then the rubber dust cover image was posted ,Vanny wrote:I was thinking as i read the OPs post that this is referring to the metal and later plastic shield that protects the bottom ball joint from stones etc which to my knowledge is not available in metal but is available in plastic, possibly from another model, maybe C15?
here is price and part No. from citroen and still available it seems as it doesnt state NFP
Part Number Description Quantity Price excl. VAT Price incl. VAT Total incl. VAT Selection
0000362306 SWIVEL BALL PIVOT PROTECTOR 3.98 GBP 4.78 GBP 4.78 GBP
also on an all families search it fits
1 document(s) found for C5 II
1 document(s) found for BX
1 document(s) found for XANTIA
1 document(s) found for C5
1 document(s) found for XANTIA II
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- BXpert
- Posts: 199
- Joined: Wed Jun 10, 2009 12:30 pm
Re: Ball joint protector
I have bought two of these:
http://www.ebay.co.uk/itm/New-362306-Ci ... 731wt_1091" onclick="window.open(this.href);return false;
Thanks everyone.
http://www.ebay.co.uk/itm/New-362306-Ci ... 731wt_1091" onclick="window.open(this.href);return false;
Thanks everyone.
Re: Ball joint protector
if you payed the full postage on them with no discounts, they cost you £6.50 each
regards malcolm
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- Over 2k
- Posts: 5917
- Joined: Wed Dec 16, 2009 8:02 pm
- Location: Harwood, Bolton
- My Cars: Land Rover Discovery Series 1 200tdi 3 door
Land Rover Discovery Series 2 Facelift TD5
2020 Fiat Panda cross 4x4 twin air. - x 27
Re: Ball joint protector
I don't remember ever seeing these before, are they fitted on all BX's?
Kevan
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
1997 Mercedes C230 W202
2003 Land Rover Discovery Series 2 Facelift TD5 - Daily driver / hobby days and camping.
1993 Land Rover Discovery 200tdi Series 1 3 door - in need of TLC
2020 Fiat Panda 4x4 Cross Twin Air.
Re: Ball joint protector
Defender110 wrote:I don't remember ever seeing these before, are they fitted on all BX's?
Kevan, lower ball-joints shields where fitted to all new BX's from new albeit manufactured from a thin tin sheet steel but if they got damaged when folks changed the ball-joints out they tended not to bother fitting them back in place.
However I my self have never knew that a plastic one was now available, I suppose its similar in a way to the front hub air scoops to direct air onto the discs as they where initially manufactured from a thin sheet steel which then got changed to plastic for the later production models !
.
-
- BXpert
- Posts: 199
- Joined: Wed Jun 10, 2009 12:30 pm
Re: Ball joint protector
Just paid the one postage. It was automatic unlike some sellers on ebay.
Re: Ball joint protector
i have seen the type in the picy above made of metal, dont remember seeing them made of plastic though
regards malcolm
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
-
- BXpert
- Posts: 199
- Joined: Wed Jun 10, 2009 12:30 pm
Re: Ball joint protector
Just to those that might be wondering. the ball joint protectors have come today and they are indeed made from metal .
- citsncycles
- Over 2k
- Posts: 3224
- Joined: Sun Aug 08, 2010 9:14 pm
- Location: Dursley, Gloucestershire
Re: Ball joint protector
There was some discussion a few months back as to whether these also helped protect the ball joints from brake heat as it seemed that the ball joints wore quicker without them.
Mike Sims
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
BX 19RD Estate Mk1 - Timex!
BX 4X4 Estate - Oh god, I've done it again!
BX 17RD MK1 - it called to me!
BX14 TGE, - SOLD
XM Turbo SD,GS Club Estate,Visa 17D Leader,HY Pickup,Dyane Nomad,Dyane 6,2CV AZL,Falcon S,Trabant P50,3x Land Rovers (88" series 1,109" series 2a FFR,series 2a Marshall ambulance),DKW F7, Lambretta LD150 x 1.5,Mobylette SP93,Ural Cossack,Ural M63,CZ 250 Sport,Honda Varadero 125,lots of bicycles & tricycles including (but not only) Sunbeams,Higgins & Bates!
Re: Ball joint protector
that and the swivel dust cover is exactly what they are there to protect from heatcitsncycles wrote:There was some discussion a few months back as to whether these also helped protect the ball joints from brake heat as it seemed that the ball joints wore quicker without them.
regards malcolm
curent ride
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)
K reg BX 17TD TZD est
also own
K reg D special
no longer have
H reg CX saffari 2.5 TRI (now gone to Malaysia)
R reg xantia 1.9TD est (gone to meet its maker)